VIOFO A139 PRO 2CH First 4K HDR Front and Rear Dashcam with the Newest Sony STARVIS 2 IMX678 Sensor

MLC NAND flash for extended endurance, excellent performance and reliability

Compatible with all VIOFO dash cams, GitUp action cameras and other cameras

Suitable for harsh conditions, waterproof, anti-X-ray, anti-magnetic

Transfer speeds of up to 95MB/s

Support Ultra HD 4K and 3D/VR

MLC NAND flash for extended endurance, excellent performance and reliability

Compatible with all VIOFO dash cams, GitUp action cameras and other cameras

Suitable for harsh conditions, waterproof, anti-X-ray, anti-magnetic

Transfer speeds of up to 95MB/s

Support Ultra HD 4K and 3D/VR

MLC NAND flash for extended endurance, excellent performance, and reliability.

Compatible with all VIOFO dash cams, GitUp action cameras, and other cameras.

Suitable for harsh conditions, waterproof, anti-X-ray, and anti-magnetic.

Transfer speeds of up to 95MB/s.

Support Ultra HD 4K and 3D/VR.

Only A139 Pro 4K/A129 Pro 4K/A229 Duo/A119 Mini are tested ok with Viofo 512GB Card. 

HK3-C Hardwire Kit is Type-C USB Port and is used in A139/A139 PRO Dash Camera.

Note: Fuse Tap is not included, check with your local car service shop or measure the size to confirm the type to use.

If still unsure, consider this Full Set Fuse Tap with ATO, Mini, Micro2, Mini Low Profile Adapter Holder.

HK3-C isn't compatible with Mini Port A119V3/A129 Duo/A129 Duo IR/A129 Pro Duo/A129 Plus Duo Dash Camera.

Professional lavalier Microphone with 3.5mm jack.

Plug & Play design, convenient to use.

Compatible with A139/A229 dash cam, smartphone, camera, PC, laptop, audio recorder, etc.

Five-foot (1.5m) extra-long cable gives ample reach, even when using a tripod/monopod.

Variety of brackets to use in different places.

Note: the iPhone adapter and USB-C adapter is not included.

【Package】2pcs ATO fuse, 2pcs Mini fuse, 2pcs MICRO2 fuse, 2pcs Mini Low Profile fuse.

【Dual-Slot Fuse Holder】Provides one fuse holder to protect the original circuit and provides a lead with the second fuse holder for a new circuit.

【Compatibility】Used for hardwiring or dash cams, adding LED strips, or other electronic devices that need direct wiring into the fuse box.

【Easily Use】Plugs into occupied or vacant energized fuse block slot. Easy installation of additional circuits without splicing or cutting.

【High Quality】Made Of High-Quality Material, good electrical conductivity, and melting resistance.

【Easy to use】Just simple press on the remote, important videos can be saved and locked without needing to take your eyes off the road, which let you drive safer.

【Easy to install】The remote control is very dexterous, only 10g, with the 3M adhesive on the back, you can choose to stick it on a suitable location on your dashboard, the small body would keep the original appearance inside your car.

【Simple pairing】Power on the camera and then press the Bluetooth Button for 3 seconds to pair the camera, the LED indicator on the remote will turns blue if get paired successfully.

【Free extra battery included】There is a free extra battery in the package, you can install it when the first battery runs out. Batteries are not able to be charged.

Tamper-proof Security Guard Installation helps to prevent unauthorized unplugging of the power cable, rear& interior cables, as well as the memory card.

Bundle Type 1：{A139 Screw Bracket} For Locking Memory Card & HK3-C

Bundle Type 2： {A139 Screw Bracket+Right_Angle Rear Cable (1M+6M)} For Locking Memory Card & HK3-C & Rear Cable & Interior Cable

Note： Please choose the bundle type as your need, and this bracket cannot be used with the car charger adapter.

It is ONLY used in A139/A139 PRO.

The newly released batch of cameras is all equipped with Right-Angle rear cables.

Please choose the same type of cable as you are using now.

If you do not have back cameras before and your camera is bought prior to Sep 2021, please choose the straight type.